Inverter heat pump for the Raymer Ray-7PD2 pool
Inverter heat pump Raymer RAY-7PD2 is a modern solution for energy-efficient and stable water heating in pools of any type. Its main feature is the use of a highly effective inverter compressor of direct current of Mitsubishi in combination with an infested inverter engine, which provides accurate power regulation, smooth work and significant power savings. Thanks to this technology, the pump maintains stable performance even in difficult climatic conditions and can uninterruptedly work at an ambient temperature from -15 ° C to +43 ° C.
Long -term resource and reliability of the structure
The design of the device is developed taking into account prolonged operation and high requirements for reliability. The heat exchanger is made of a titanium pipe, which guarantees corrosion resistance even when used in pools with an increased concentration of chlorine or salt. The heat pump is equipped with a remote control system, built -in automatic diagnostics and convenient access for service, which greatly simplifies the operation.
Silent work for maximum comfort
Particular attention is paid to user comfort. Due to the high -quality sound insulation of the level of Space Capsule and the built -in thickened cotton muffler, the device works extremely quietly, which allows you to install it even next to the recreation areas. The intellectual thawing system increases the efficiency of heating and supports the stable operation of the equipment.
Intellectual defrosting system
The system analyzes the ambient temperature, the state of hoarfrost on the heat exchanger and triggers defrosting only then, when it really is necessary. Due to this, the time of defrosting is reduced more than 20%, which allows you to increase the duration of active heating and reduce energy consumption.
Remote control and smart settings
The heat pump can be controlled remotely using Wi-Fi through a mobile phone. This allows the owners of the pools to control the water temperature, set up operating modes and receive notifications about the state of equipment even when they are outside the house. The pump is capable of working in a wide range of thermal capacities - from 5 to 45 kW, What makes it suitable for private pools, hotels, sports complexes and schools.
Operation safety
Operation safety is one of the main priorities. The device has reliable protection against leaks, electric shock, overstrain and other emergency situations. The function of regular water sterilization is also provided, which helps to maintain the hygiene of the pool at the proper level without additional effort.
Environmental friendliness and high efficiency
The use of ecological refrigerant R410A provides safe operation of the device without prejudice to the ozone layer. The system is able to achieve the coefficient of energy efficiency before 6,0, which means, that each unit of consumed electricity is produced up to six units of thermal energy. Compared to traditional methods of water heating, operational costs are reduced by 65–80%, What makes an investment in such a pump economically profitable in the short term.
Work scheme for the inverter heat pump for the pool
The system consists of the main block of the heat pump, recirculation pump, sand filter and additional safety and control elements.
Water from the pool enters the system through drain holes and an overflow line. First it passes through a recirculation filter pump and a sand filter, where cleaning from mechanical impurities and pollution occurs. If necessary, the supply of chemical reagents for disinfection is provided.
The purified water is supplied to the heat exchanger of the heat pump. The main unit of the heat pump extracts heat from the air, Heating water and puts it back to the pool through the reverse line.
To prevent reverse current The check valve is installed. The system is equipped with a control panel, which allows you to configure the temperature of the water, control pumps and control the condition of the equipment.
The heat pump works on the principle of recirculation: water constantly circulates through the filter, heats up and returns to the pool, Supporting the given temperature.
Comprehensive solution for the pool
Heat pump Raymer RAY-7PD2 - This is a combination of intellectual automation, high energy efficiency, reliability and simplicity of control. It provides stable water temperature in the pool, Silence and comfort during work, as well as significant savings in heating, turning the process of heating the pool into the most simple and environmentally friendly.
HEAT PUMP for swimming pools 5,9 kW 220V / 50Hz 1 phase
|
Features
| Model |
RAY-7PD2 |
|---|---|
| Rated heating power, kW |
5,9 (0,8~6,8) |
| Nominal cooling power, kW |
0,5~3,7 |
| Rated input power, kW |
0,86 (0,5~1,0) |
| Rated input heating current, A |
– |
| COP |
6,8~15,6 |
| Starting current |
– |
| Max working the flow, A |
– |
| Source of power |
220V/50Hz |
| Device dimensions (Ш * Г * В), mm | 980*350*550 |
| Device weight, kg | 55 |
| Noise level, Db | 50 |
| Water temperature control accuracy |
±2℃ |
| Operating temperatures |
-15℃ ~ +43℃ |
| throttle type |
Electronic expansion valves |
| Refrigerant |
R410A |
| Compressor |
Mitsubishi |
| heat exchanger | Titanovy heat exchanger |
| Bereavage | Four -way valve of reverse defrosting |






