Project task
Owners of the house area 220 sq.m collided with the problem of high heating costs during the winter period. The previously used heating system did not provide the necessary level of savings, What caused the search for a more effective solution. The main goal was to create an alternative system, which would reduce energy consumption and provide a comfortable temperature in the room at any time of the year.
The chosen decision
After calculations and analysis of available options, It was decided to install a heat pump Raymer DC Inverter RAY-24DS2-EVI (380V). This model is a modern solution for heating, cooling and providing hot water of medium -sized house. It is characterized by high energy efficiency and reliable work even at low external temperatures. In combination with the heat pump, a buffer container was used Raymer Imp 100 liters to optimize the operation of the system.
1. Installation of the outdoor unit Raymer DC RAY-24DS2-EVI (380V)
The outer block of the heat pump Raymer is installed under a reliable canopy, which provides effective protection against direct precipitation, such as rain or snow, thereby extending its operation.
The design is fixed on a durable metal frame, which provides stability and minimizes vibrations during the compressor operation. The metal frame is reliably mounted, which prevents possible loosening during operation. It is important to note, that there is enough free space around the outer block, which contributes to good air circulation, necessary for effective heat transfer and optimal operation of the system.
Additionally, a number of improvements were performed, aimed at improving the reliability and efficiency of the heat pump. In particular, Anti -vibration stands are installed on the supports, which significantly reduced the level of noise and vibrations during operation, Providing comfortable operation. All electric wires, Including an orange cable, were securely isolated in special corrugated sleeves, protecting them from mechanical damage and environmental exposure. A high -quality condensation system is also organized, which provides stable outflow of water even in the winter period, preventing ice under the block. To increase protection against possible snow drifts, the outer unit is raised to the optimal height, which is fully consistent with recommendations for regions with snow winters.
All these improvements not only increased the stability of the heat pump work, But also ensured its durability even in the conditions of harsh frost, Guaranteeing efficiency and uninterrupted work throughout the heating season.
2. Installation of the internal block Raymer DC Ray-24DS2-EVI (380V)
Installation of the internal unit of the heat pump is accurately and thoughtful, What can be seen by the correct location of the elements and the organization of connections. The installed hydraulic engine is placed on the wall in the optimal place, which provides convenient access for maintenance and visual control. All connections are made using copper pipes, which guarantees high reliability and durability of the system. Connection is equipped with the necessary locking reinforcement, which allows you to quickly turn off or redirect the flow if you need to maintain.
The photo can be seen, that the filters of rough cleaning are used, which additionally protects the system from mechanical pollution. Expansion tank is connected competently, which provides the necessary level of pressure in the system. The supply and return of water is clearly indicated, pipelines are securely fixed to the wall, what prevents vibrations and possible loosening.
3. Connecting the Raymer IMP storage tank 100
Connection of the Raymer IMP tank 100 liters fulfilled in accordance with modern standards and safety requirements. This tank is made of high -quality stainless steel, which ensures its resistance to corrosion and prolonged operation. Its integration into the heating system allows not only to accumulate, but also maintain a stable temperature of hot water, which increases the efficiency of the heat pump and reduces the load on the system.
The supply tank is connected to the Raymer DC INVERTER RAY-24DS2-EVI heat pump through a reliable copper strapping, which provides a quick and uninterrupted stream of coolant. The input and output of the coolant are correctly designed, which avoids unnecessary heat loss. Cutship cranes were also used to quickly overlap the flow if it is necessary to maintain or replace the system elements.
To protect against mechanical contaminants at the inlet to the tank, a coarse cleaning filter is installed. This decision prevents the entry of rust particles, scraps and other impurities, which can damage the internal components. An expansion tank is also provided to compensate the temperature fluctuations of the volume of the coolant, which increases the reliability of the system and protects it from hydrouches.
The supply tank is connected to the hot water supply system, which allows you to effectively use the accumulated heat to ensure stable supply of hot water to the house. Thanks to integration with a heat pump, The heating process occurs with minimal electricity costs, which provides efficiency and comfort at the same time.
4. Installation of voltage stabilizers in the heating system with a heat pump
Installation of three voltage stabilizers of an electric ampere in 12-1/25 V2.1, one unit for each phase provides reliable protection of the heat pump and all connected components from voltage jumps and overvoltages into the network. This solution allows you to maintain stable power parameters, which is critical for the correct and prolonged operation of the equipment. Due to the high speed of stabilizers, The electronics and compressor of the thermal pump is operated in normal mode even with sharp voltage fluctuations, which increases the efficiency of the system and prevents possible breakdowns. Also, the use of three separate stabilizers for each phase allows you to evenly distribute the load and ensure the maximum efficiency of the operation of all units of the heating system.
The advantages of the Raymer Ray-24DS2-EVI of the new generation
The Raymer Ray-24DS2-EVI heat pump has power 24 kW, making it ideal for efficiently heating rooms up to 240 sq.m. It provides significant energy savings of up to 80% compared to traditional heating systems, which reduces heating costs.
Using green energy, this heat pump helps reduce CO2 emissions and has a positive impact on the environment.
Inverter compressor and Enhanced Vapor Injection technology (EVI)
Inverter technology allows you to adjust the pump power depending on demand, providing stable and efficient heating of the room. Thanks Enhanced Vapor Injection technology (EVI), The heat pump can operate at low temperatures down to -30 °C, which expands the possibilities of use in different climatic conditions.
New black design for better heat absorption
New design in black, as a result of the latest developments and research in the field of heating equipment for better absorption of heat from the environment, makes the Raymer Ray-24DS2-EVI heat pump the best choice among other heating systems.
Black surfaces are less susceptible to visible dirt, dust and scratches compared to white or light-colored surfaces. This reduces the need for frequent cleaning and maintenance of the device, which is user friendly.
Black has better heat absorption ability, which can be useful for outdoor units of heat pumps in the cold season. This helps prevent icing and improves operating efficiency..
Remote control
Built-in Wi-Fi module allows you to control the heat pump from a distance. Wherever you are, you can turn on/off the heat pump, and also track its performance with access to the Internet.
The convenience of this function is that, that even being on a trip, you can turn on and set the heating or cooling operation in advance, and enjoy a comfortable temperature in the house upon arrival, without waiting for the system to work at full capacity.
