OUR WORKS
Object: m. Zhulyany, Kyiv region, The house with an area 130 м²
Task
The house in Zhuliany city of Kyiv region has area 130 м² and was equipped with an electric boiler -based heating system. This scheme has provided the required heat level, However there were significant drawbacks: High operating costs due to significant electricity costs, Limited automation and low energy efficiency.
Realization
The system is implemented so, that the electric boiler has been left, as a backup power source in case of stopping the heat pump for service. Currently supply and reverse flow is organized through an electric boiler, In which the circulation pump is built - that is, the electric boiler acts as a circulation pump. The system works coherently and reliably.
Object: with. Tarasivka, Kyiv region, house on 140 м²
Features of the project
System installation has been performed by the customer independently Under the guidance of our engineers in remote format . This has become possible due to careful calculations and professional advice , that allowed all work to be done effectively and in accordance with technical requirements.
Raymer Raymer Ray-13ds2-EVI heat pump was selected to ensure stable work (220V) black, as well as the heat pump additionally installed the following items:
- Raymer IMP tank, 60 liters (Stainless Steel, Horizontal mount) - to align the hydraulic contour and maintain pressure in the system .
- The indirect heating tank is Raymer Dhwp , 200 liters (Stainless Steel) – for efficient preparation of hot water.
- Raymer's three -way valve 325 TW - To automatically switch the coolant flow between heating and hot water contours .
Object: Residential building in with. Khodosivka, area 150 м²
The goal of the project
The main purpose was to, To organize a modern and energy efficient heating and water supply system of hot water with a newly built house area 150 m² in Khodosivka village. The customer predicted the installation of a warm floor and output of contours to the boiler room , But the main source of heat has not yet been selected . Given the desire to get a reliable , automated and economical system without the need to use gas or solid fuel boiler , It was decided to stop immediately on a heat pump .
Decision
The air-water pump was installed to ensure the heating and preparation of hot water Raymer RAY-15DS2-EVI, that completely covers the thermal needs of the house. The system is also integrated Raymer DHWP 200l Hot Water Supply Bank and Raymer IMP 60L buffer capacity , which allows to increase the efficiency of equipment and optimize the hydraulic scheme.
Object: with. Yablunovka, Kyiv region
Analysis project
As part of an increase in the energy efficiency of a private home in the village of Yablunovka, it was decided to replace the existing system of electrical heating with modern thermal equipment. Earlier heating was carried out by an electric boiler, that provided heat for a building area 150 м².
After the previous object, Analysis of thermal losses of the house , available specifications , as well as the customer's expectations about comfort and expenses , the best option was chosen Raymer Ray-15D2MN-EVI "Air-Water" heat pump.
The facility was wrapped in disassembly of electric boiler. A watermodule is installed in its place Raymer RAY-15D2MN-EVI.
Budo is also connected to the buffer tank to the hydraulic module and the combs of the warm floor.
The whole system works at the expense of independent energy supply based on SES through a solar inverter.
Object: Residential building in with. Prince
The main requirements of the client:
- Significant reduction of heating costs;
- Integration with an existing warm floor system and radiators;
- Ensuring the supply of hot water with the possibility of rapid supply of warm water;
- Fully automated and quiet in work system.
Decision
The optimal solution was the installation of the Raymer Ray-15DS2-EVI inverter heat pump , which is able to work effectively even at low external temperatures up to -30 ° C. In addition, tanks were installed to the heat pump: buffer capacity of Raymer IMP 60, DHP Raymer Dwhp 150 and a reliable recirculation has been set up, Since the boiler room is in the basement.
Object: with. Bat, House to 100 м²
Project tasks
The client has addressed, To reduce heating costs, retaining an existing pipeline system , collectors and automatics . It was important to integrate a new heat source without complete dismantling of the boiler, with minimal intervention in the already established hydraulics. Also the customer wanted to get the opportunity for autonomous work without losing comfort .
Decision – Raymer Ray-10ds2-EVI heat pump
A heat pump was selected as part of the project Raymer RAY-10DS2-EVI (10 kW). This is an energy efficient model with an inverter compressor, which can work below -25 ° C and is able to completely replace the electric boiler under Ukrainian climate.
Object: the dwelling house in the s. Kivertsi, area 150 m ²
Project tasks:
After analyzing the advantages and disadvantages of each of the decisions, The final engineering decision was made in favor of the heat pump . Unlike an electric boiler, Raymer Ray-13ds2-EVI heat pump (220V) Not only does the premises heated effectively, but also performs the function of heating water to supply hot water (HVP).
Object: m. Grapes, house 170 м²
Project tasks
The owner of the house with an area 170 m² made a clear request – reduce the cost of heating, which grew significantly each heating season because of the use of electric boile.
The best option was the replacement of the electric boilet with the air pump-water Raymer Ray-15ds2-EVI power 15 kW. This inverter equipment is able to work effectively even at low temperatures, significantly reduces electricity consumption.
The owner has installed the heat pump on its own, that additionally allowed to save on the cost of installation.
Object: The dwelling house in the s. Osokorki area 160 м²
Project tasks:
Appeal from the customer to modernize the heating system in a private home. Pre -house was heated by a solid fuel boiler, However, because of high fuel costs, the complexity of service and the need for constant control, The question of replacing with more modern and economic equipment. The important requirements of the customer were: Increasing energy efficiency, minimizing service costs and reducing environmental impact.
A modern Raymer Ray-15ds2-EVI modern heat pump was selected to complete the task, that meets all customer requirements. This is an innovative air-water model with inverter technology , that provides high energy efficiency even at low external temperatures.
Object: Office space 150 m² m. Cherry
Project tasks
We were tasked with creating a modern and effective climate control system for an office space area 150 м². It was important to the customer not only reliable heating in the cold, but also comfortable cooling in the summer, In doing so with the lowest as possible operating costs. in addition, The space to install the outer block was limited by a narrow passage between the building and the fence, which required a non -standard technical solution.
Object: The dwelling house in the s. Osokorki area 160 м²
Project tasks:
Appeal from the customer to modernize the heating system in a private home. Pre -house was heated by a solid fuel boiler, However, because of high fuel costs, the complexity of service and the need for constant control, The question of replacing with more modern and economic equipment. The important requirements of the customer were: Increasing energy efficiency, minimizing service costs and reducing environmental impact.
A modern Raymer Ray-15ds2-EVI modern heat pump was selected to complete the task, that meets all customer requirements. This is an innovative air-water model with inverter technology , that provides high energy efficiency even at low external temperatures.
Object: a two -storey house in m. Chernivtsi
The purpose of the project
A heat pump was installed as part of the modernization Raymer RAY-18DS1-EVI (380V), which is integrated into an existing heating system. The equipment is connected to the buffer capacity and the DHW tank to ensure optimal heat distribution in the system. This solution made it possible to significantly reduce energy consumption and increase comfort in the house in the winter, Using eco -friendly energy from solar panels.
Object: The dwelling house in the s. Medenichi with an area 160 м²
Project tasks:
Optimization of the heating system thus, To make the existing solar energy generation from solar panels is enough to complete the thermal needs of the house even in the winter, Without attracting additional sources or exceeding the power of a solar power plant.
Decided to install Raymer Ray-15ds2-EVI Raymer Raymer Rayer Ray-15ds2 (220V), which is perfect for paired with a solar power plant.
Object: a two -storey house in m. Chernivtsi
The purpose of the project
Customer - the owner of a two -storey dwelling house in Chernivtsi - previously used an electric boiler, However, due to high electricity costs, I decided to find a more economical solution.
The main requirement was to reduce monthly heating costs without loss of comfort. Also important was the stable operation of the equipment in winter and minimal service costs.
Object: Industrial hangar of the enterprise Kyiv Technology 600 м²
Project tasks:
Kyiv Technology has requested the organization of an efficient heating and cooling system for the production shop area near 600 sq. m and the height of the ceiling from 6 to 8 meters. The main requirement of the customer was to provide a stable microclimate indoors regardless of external weather conditions, as well as minimize energy consumption.
Object: Temple in m. Yavoriv on 350 м²
The purpose of the project
At the stage of construction of the temple in Yavoriv, the question was the choice of the optimal heating system. The building is built of brick, that provides good thermal inertia, However requires a powerful and effective heat source for comfortable maintenance in the cold season.
A modern heat pump was selected to accomplish this task Raymer RAY-32DS2-EVI (380V) - a reliable and productive model, that is able to provide stable heating in large areas with minimal electricity costs.
Object: A house with a system of solar inverters
Project tasks:
Ensure efficient and energy -saving home heating area 160 sq.m With the help of a modern monoblock pump Raymer RAY-15MN (15 kW, 380AT). The main purpose of the project is to completely switch to the use of renewable energy sources for heating and power supply, in particular solar panels, which allows you to significantly reduce utility costs.
Object: Private house in. Cherkasy on 100 м²
The purpose of the project
The main purpose of modernization is to reduce the cost of heating and increase energy efficiency by installing a heat pump.
Modernization of the heating system in the house area 100 sq.m, which previously worked on the basis of an electric boiler.
Raymer Ray-10MN2 monoblock was selected to ensure efficient and economical heating (220V) In a stylish black performance. The monoblock is optimally suited for servicing homes of a similar area and can significantly reduce electricity costs compared to traditional electric boilers.
Object: House in the village. Pidhirtsi, In the house on 350 м²
The purpose of the project
Owner of a large two -storey house with an area 350 m² addressed the task of replacing an existing heating system with a more modern and economical.
After analyzing the object, the optimal solution was selected-Raymer Ray-32DS2-EVI power pump with power 32 kW, three -phase network (380V). This equipment is perfect for large homes, providing as heating, so and hot water supply.
System installation was performed by our command, After all in the house is a limited boiler room, which required an accurate approach, competent planning and experience with large pumps.
Object: Private house in. Mogilev-Podilskyi on 180 м²
The purpose of the project
The customer contacted us, which already had a mounted heating system in the house area 180 м². Due to large heating costs it was decided to set a more economical solution – heat pump. The peculiarity of this project was the, that the installation was performed by the customer. We provided full technical support: They advised, helped with the selection of equipment, made a connection scheme and instructed at each stage. Thanks to this approach, it was possible to combine savings on installation with professional quality of implementation.
Object: House in the village. Sofiivska Borschagivka, In the house on 120 м²
The purpose of the project
In the newly built house area 120 square meters there was a need to organize a modern and energy efficient heating system. Customer turned with a clear task - to provide a comfortable microclimate in the house with minimal operating costs. After detailed object analysis, Discussion of technical requirements and calculation of heat losses, It was decided to install Raymer Ray-13ds1-EVI heat pump. This solution allowed not only to reliable heating, but also the possibility of cooling and hot water supply, Having made the system as universal as possible.
Object: Private house in the village. Bobrytsya on 120 м²
The purpose of the project
Organization of heating for a private home: Installing Raymer Ray-10ds1-EVI heat pump.
The main task was to provide stable and economical heating of the room in the cold period, as well as create comfortable living conditions with minimal energy costs.
After detailed object analysis, Estimation of thermal losses and discussion of the client's needs was decided to install a heat pump Raymer RAY-10DS1-EVI. This energy -efficient solution not only allows the house to heat in winter, but also to provide hot water and even work in cooling mode in the summer.
Object: House in the village. Great Alexandrovka, In the house on 100 м²
The purpose of the project
The main purpose of this project was to organize an effective heating system in the house area 110 sq. m, providing a comfortable microclimate with minimal energy costs.
Raymer Raymer Ray-10ds2-EVI was chosen to achieve this goal as the main heat source, And the main heating system was the warm floor. This approach allows to distribute heat evenly over all rooms, providing a stable temperature and comfort for residents.
Installation of a warm floor and its connection to the heat pump are made taking into account modern standards of energy efficiency, which allows the most efficient use of energy and optimize heating costs.
Object: Private house in the village. Pidhirtsi on 150 м²
The purpose of the project
The main purpose of this project was to create an energy efficient and autonomous heating system for a new private home. Owners considered two options: Installing an electric boiler or heat pump. The choice in favor of the Ray-15MN heat pump was due to its high efficiency, the ability to operate at low temperatures and significant savings on electricity costs compared to traditional electric boiler.
Decision
When choosing a heat pump for autonomous home heating, it is important to consider as technical characteristics of equipment, and efficiency in real operating conditions. Given the thermal characteristics of the house, The optimal solution was the Ray-15MN "monoblock" heat pump.
Object: House in the village. Vovchynets, In the house on 140 м²
Task to the project
House in the village of Vovchynets, Ivano-Frankivsk region, Previously heated by electric boiler. The owner decided to replace it with a more efficient heat pump Raymer RAY-15DS1-EVI To reduce electricity costs and increase energy efficiency.
Decision:
After analyzing the options, the Raymer Ray-15DS1-EVI inverter heat pump was selected 15 kW. The project was performed by the owner on his own, In compliance with all the necessary requirements for stable and efficient operation of equipment.
Object: Private house in the village. Petrikov on 120 м²
Tasks the project
The main goal of this project was to ensure a comfortable climate in the house, allows minimizing energy costs and increase the level of autonomy of heating.
Previously, the house was heated using an electric boiler. The cost of heating the boiler was too high, Therefore, the customer began to look for alternative heating sources to save resources.
Decision
When choosing a thermal pump for autonomous heating of the house, it is important to consider as the technical characteristics of the equipment, and its effectiveness in real operating conditions. After analyzing the available options, the Raymer Ray-10DS2-EVI model was chosen, which optimally complies with the needs of the customer according to performance parameters, economy and reliability.
Object: House in the village. Molnitsa, In the house on 140 м²
Project tasks
The main task of the project was to replace an outdated heating system with a more energy efficient solution, that will reduce heating costs and increase comfort in home. Earlier for heating used an electric boiler in combination with the warm floor system and radiators, However, the constant increase in electricity tariffs has made such heating too costly.
Decision:
To solve this problem, it was decided to install a modern Raymer Ray-15ds1-EVI Raymer Raymer Pump on 15 kW, which is able to work effectively even at low temperatures up to -30 ° C, consuming much less electricity. The system had to provide a stable level of heat in rooms, uniform temperature distribution through a warm floor and radiators, as well as integration with a hot water jacket tank.
Object: Private house in. Boyarka on 90 м²
The goal of the project:
The main task of this project was to replace a solid fuel boiler with a more modern, an effective and autonomous source of heating, as well as minimize long -term heating costs.
Decision:
An analysis of the existing heating system, In particular, the compliance of the installed radiators to work with low -temperature heat source, as well as deciding to install a Raymer Ray-10Mn monoblock pump on 10 kW with installing an additional heat exchanger in the middle of the house to prevent system freezing.
Object: House in m. Vinnytsia, In the house on 120 м²
The goal of the project:
Customer turned to our company to organize a private home heating area 120 м², Where was the warm floor system planned. The main purpose was to, To find an effective and economic method of heating, that would provide comfort in the cold and minimize electricity costs.
Decision:
After analyzing the options, the Raymer Ray-13ds1-EVI inverter heat pump was selected 13 kW, characterized by high energy efficiency and stable work even at low temperatures. Electric boiler remained as a backup heat source in the system, previously established.
Object: Private house in the village. Khotaivka on 140 м²
The goal of the project:
The customer is stated to organize heating, Which one could integrate with the solar panels and the warm -tight system, so you can minimize electricity costs as much as possible.
Decision:
Having calculated, What amount of electricity can be obtained from solar panels and an equipment consumption is decided to install an invert the heat pump Raymer Ray-15ds2-EVI, The power of which is enough to cover the given area of heating and hot water supply.
Object: House in the village. Khodosivka, In the house on 160 м²
The goal of the project:
Replacement of an existing heating system with a more economical in the house, electric boiler heated.
Decision:
Taking into account the data provided by the customer, It was decided to install Raymer Ray-19MN monoblock, which was supplemented by the soldering heat exchanger in the middle of the house, which distributes the coolant among themselves.
Object: Private house in. Ishmael on 100 м²
The goal of the project:
Organization of heating in a newly built house. There was a question between installing an electric boiler, gas boiler or heat pump.
Decision:
Having calculated all the costs of heating by different systems, It was decided to install Raymer Ray-10ds2-EVI heat pump on 10 kW, which is quite capable of covering the need for heating a given area, and can also provide hot water and, for the need, Cooling in summer.
Object: House in the village. Cherries, In the house on 120 м²
The goal of the project:
The main task of the project was to optimize the heating system in the house area 120 sq. m. on more economical. The owner started searching for alternative heat sources, that could ensure the same efficiency, But with less power consumption.
Decision:
Calculating the data of the house, Energy efficiency and volume of heating area, was resolved, that the heat pump with power Raymer Ray-10ds2-EVI on 10 kW will cover the need for heating and in the water height for DHW.
Object: A private house in the village of Gatne on 150 м²
The goal of the project:
The task of the project was to replace the existing heating system with a more economical for a three -storey building on 150 sq.m. Earlier the house was heated at the expense of electric boile, but heating such an area has become too expensive.
Decision:
It was decided to install Raymer Ray-18ds2-EVI heat pump on 18 kW, which is quite capable of covering the need for heating a given area, and can also provide hot water and, for the need, Cooling in summer.
Object: House in the village. Ivankiv, of Kyiv region in the building on 220 м²
The goal of the project:
The newly built house has the question of organizing a heating system, Therefore, the choice between the installation of the electric boiler and the heat pump, which is capable of working in three different modes and integrated with the warm floor system.
Decision:
Calculating the area of the heating area (warm floor), Determining the volume of the coolant, and by calculating the desired power of the heat pump, defined, that the Raymer Ray-18ds2-EVI heat pump power (220V) на 18 kW will be sufficient to heat a given area.
Object: Private house in. Vorzel on 130 м²
The goal of the project:
The customer's appeal was to calculate the efficiency of installing a heat pump, as an alternative source of heating in the house on 130 м², Since the heating of the electric bone has become too expensive. In this house is a warm floor system, Therefore, the heating area is quite large and requires powerful equipment for normal water circulation in the system.
Decision:
The client has made a decision in favor of the heat pump, Which one in 4 times more effective than the electrotel - meant, that on 1 kW of electricity consumed the heat pump produces 4,82 kW of thermal energy, whereas the electric boiler's performance is equal to 1:1.
Object: a house in the village of Khodosivka, of Kyiv region in the building on 130 м²
The goal of the project:
The main task was the organization of heating for the house on 130 m² is more economical without losing its efficiency. An electric boiler was previously installed in the house, but heating such an area has become too expensive, therefore, the question arose of replacing it with a more effective alternative.
Decision:
It was decided to install a Raymer RAY-13DS2-EVI heat pump, which will be quite enough for heating the given area. This heat pump is a good replacement for an electric boiler, since he is able to work in 5 times more effective, producing 4,9 kW per 1 kW consumption, while an electric boiler operates in a range 1:1.
Object: Private house in. Kyiv on 150 м²
The goal of the project:
The main task of installing a heat pump is to replace the existing heating system based on a solid fuel boiler., since raising raw materials and procurement has certain difficulties and requires constant supervision. The option of replacing it with an electric boiler or a heat pump was considered.
Decision:
Comparing the electricity consumption of an electric boiler and a heat pump, as well as its additional features, such as cooling and hot water supply, the client decided in favor of a heat pump, which in 4 times more effective than electricity.
Object: a house in the village of Vyshenki, of Kyiv region in the building on 100 м²
Task:
Our engineers faced the task of converting the already existing system with a heat pump of the monobloc type into a system with an antifreeze solution, to avoid system defrosting at sub-zero temperatures.
Decision:
Since it was impossible to pour antifreeze solution into this system, as it is not provided for by the technical characteristics of the monoblock, since a water heat exchanger is mounted inside the unit, a completely non-standard decision was made to move the heat pump heat exchanger into the house.
Object: Private house in. Uzhgorod on 150 м²
The client requested to calculate the equipment for replacing the existing heating system based on an electric boiler, since electricity consumption was quite significant and expensive, taking into account the constant increase in the price of utility services.
Realization:
After weighing all the indicators of the given object: area, insulation, temperature features of the area, placement of the boiler room in the building and height differences, it was decided to install the Raymer RAY-18DS1-EVI inverter heat pump, which will be able to provide heat to the given heating area, and also integrates well with the existing heating system, therefore an electric boiler will remain a backup source of heating in case of maintenance of the heat pump.
Object: a house in the village of Sredne Vodyane, Transcarpathian region in the building on 400 м²
Project task:
Task:
Before the owner of the house on 400 sq. m. the question arose of replacing the existing heating system, which previously operated on the basis of a solid fuel boiler, more efficient and economical.
Decision
It was decided to install a Raymer RAY-32DS2-EVI heat pump, which has a super powerful compressor and fans, able to provide heating for large areas. Additionally, it is recommended to install a Raymer IMP storage tank 100 l, which is quite enough to store the coolant in the system and supply it to the radiators.
Object: Private house in the village. Abundant Russian on 110 м²
Decision:
Having analyzed the features of the climate, ergonomics of the house, insulation, it was decided to install an inverter heat pump Raymer RAY-10DS1-EVI power 10 kW, which is highly efficient and significantly reduces electricity costs.
Thanks to a high energy efficiency ratio 3,6 this heat pump is almost 4 times reduces costs for utility payments.Po
Object: house in the village of Kryukivshchyna, of Kyiv region in the building on 120 м²
Project task:
The customer made a request to replace the existing electric boiler, to significantly reduce the costs of utility payments. The house is new, well insulated area 120 м². But the boiler room is very small, therefore, the task was still to fit in a very small space.
Decision
It was decided to install an inverter heat pump
Raymer RAY-13DS2-EVI of a new generation, which has an improved fan and compressor. This heat pump has high SOR energy efficiency indicators. 4,9, what means, that on 1 kW of energy consumed by the Raymer RAY-13DS2-EVI heat pump 4,9 kW of heat.
Object: Private house in. Kyiv on 150 м²
Decision:
Taking into account all the features of the designed heating system, compatibility with a warm floor, it was decided to install a heat pump Raymer RAY-15DS1-EVI, which is able to work at minus temperatures down to -30°C, and can also provide hot water and cooling in summer.
This heat pump is also distinguished by its energy efficiency.: на 1 kW of consumed electricity it gives 4,82 kW of thermal energy.
Hot water supply will be provided by a Raymer DHWP indirect heating tank 200, as well as for more efficient accumulation of the coolant in the system, a Raymer storage tank will be installed on 100 l.
Object: a house in the village of Gorenichi, of Kyiv region in the building on 120 м²
Project task:
The main request of the customer was to reduce heating costs, previously the house was heated by an electric boiler.
Decision
It was decided to install a new generation Raymer RAY-15DS2-EVI inverter heat pump, which has an improved fan and compressor. This heat pump has high SOR energy efficiency indicators. 4,82, what means, that on 1 kW of energy consumed by the Raymer RAY-15DS2-EVI heat pump 4,82 kW of heat.
Object: Private house in the village. Lighthouses on 80 м², Odesa region
Project task:
Customer, lives in the village of Mayaki, Odesa region applied for the selection of equipment for heating a house of a small area. Bthe fishing rod is located near the river, therefore, there is access to groundwater, therefore, there is a possibility of drilling a well.
Decision:
After analyzing the owner's house, territory and features of the earth's surface, the possibility of drilling a well, it was decided to install a thermal geothermal heat pump Raymer RAY-07WW, which will provide heating of the house through radiators.
Object: house in the village of Rogoziv, of Kyiv region in the building on 80 м²
Project task:
The main goal of the project was to install a new heating source in the house 80 sq. m, which would save money on heating, but would still be effective at very low temperatures. Also, the equipment should be well combined with the underfloor heating system and provide hot water supply..
Miscalculation of equipment:
After analyzing the existing underfloor heating system, heating quadrature, it was decided to install a Raymer RAY monoblock-07MN, which has sufficient power to provide heating, provided that cooling fan coils and hot water supply are installed.
Object: Private house in the village. Erythema on 150 м², Kyiv region
Project tasks
The client is interested in installing a heat pump, because there was a question of reducing heating costs, since before that the heating system worked on the basis of an electric boiler.
After analyzing the presented data, it was decided to install the Raymer RAY-15DS1-EVI inverter heat pump (380V), which due to its technology and high efficiency ratio (SOR 4,82) able to provide significant savings on heating.
The control of the heat pump will be configured via Wi-Fi, which provides ease of use and the possibility of remote control.
Object: house in the village of Savenki, of Kyiv region in the building on 110 м²
Task:
A resident of the village of Savenka turned to our company with a request to select equipment in order to reduce costs for heating and hot water. The client has long since started looking for alternative and more ecological means of heating without losing their efficiency even at the lowest temperatures.
As a result of the analysis of the client's capabilities and the ergonomics of the house, it was decided to install a Raymer RAY-10WW geothermal heat pump, that in 4-5 times more efficient than an electric boiler, which until now was the main source of heating in the house.
Object: Private house in the village. Will winter on 110 м², Kyiv region
Project tasks
The customer received a request to pick up equipment for the house on 110 sq.m., to reduce heating costs, but with preservation of thermal productivity even at low winter temperatures. In the conditions of a constant increase in the cost of electricity, it is simply necessary to look for alternative sources of heating, therefore, the customer was interested in heat pumps, which have the ability to work on cooling, heating and hot water supply.
Object: a house in the village of Khotiv, of Kyiv region in the building on 120 м²
Task:
In the house on 120 m², a warm floor system was installed and the main task was to replace the electric boiler with a more economical heating system, that would work effectively even at very low temperatures.
Decision:
To achieve the goal, it was decided to install the Raymer RAY heat pump-07MN, which has high efficiency and low operating costs, at the same time, it works well with the underfloor heating system.
Object: Private house in the village. Guess the 150 м², Kyiv region
Task:
Installation of a heat pump for cooling, heating and hot water, to save on heating in winter, as well as on the installation of additional air conditioners for the summer period.
Decision:
Installation RAY-15DS1-EVI (380V) became a truly effective solution to this problem, after all, TN Raymer is able to work on heating at external temperatures down to -30°, and the installation of fan coils will give the ability to cool the house in the summer period of the year.
Object: a house in the village of Nerubaiske, Odesa region
Task:
In the newly built house on 80 m² decided, which heating system is best to install, saving money, but at the same time have comfortable conditions in the house.
Decision:
To achieve the goal, it was decided to install the Raymer RAY heat pump-07MN, which has high efficiency and low operating costs, at the same time, it works well with the underfloor heating system. A solution of ethyl alcohol was added to the system to prevent the system from defrosting during emergency power outages.
Object: Private house in. Cell on 150 м²
Task:
The main task was to reduce heating costs, since there was already a solid fuel boiler in the house, and an electric boiler. The solid fuel boiler turned out to be inconvenient, as you need to constantly add fuel, and the costs of heating with an electric boiler exceeded expectations.
Decision:
The decision to install a heat pump RAY-15DS1-EVI (220V) became the most efficient and effective in saving heating costs, while maintaining optimal and comfortable conditions in the house.
Object: a house in the village of Stary Lviv, Lviv region
Task:
The owner of a newly built house asked for advice on the selection of heating equipment before putting it into operation, which will be able to heat the area 200 m² and significantly save on utility bills.
Completed scope of works
- Analysis of the existing system of heating and insulation of the house.
- Choosing a place to install the heat pump.
- Assembly Raymer RAY-15DS1 EVI inverter heat pump (380AT).
- Installation of additional components: storage tank on 60 l
- Setting up and testing the system.
Object: Private house in. Sums on 150 м²
Task:
The client declared a reduction in heating and water supply costs for the house.
Decision:
Pump installation Raymer RAY-15WW involved drilling a well and submerging the heat exchanger to a depth calculated by specialists, which ensures optimal pump efficiency.
Compared to an electric boiler, which was already installed before this, the ground heat pump has a significantly higher efficiency factor (efficiency) and produces at medium power 12 kW of thermal energy during consumption 3,4 kW.
Object: house on 220 m² in s. Petrykiv, Ternopil region
Task:
The owner of a newly built house asked for advice on the selection of heating equipment before putting it into operation, which will be able to heat the area 200 м². The customer also noted, that it is planned to lay a warm floor in the house, which will be the main source of heating, and also, if possible, immediately include hot water supply in the system.
The main task was to install more economical and modern equipment, which would provide stable heating throughout the heating season at minimal utility costs.
Completed scope of works
- Analysis of the existing heating system
- Choosing a place to install the heat pump
- Assembly Raymer RAY-18DS1 EVI inverter heat pump
- Installation of additional components: hot water tank on 200 l, storage tank on 100 l
- Setting up and testing the system.
Object: Private house in. Netishin, Khmelnytskyi region
Task:
The client announced the installation of a heat pump for heating a residential building on 150 sq.m. to reduce heating costs.
Decision:
To solve this problem, it was decided to install the monoblock Raymer RAY-15MN, which has high efficiency and low operating costs.
To ensure stable operation of the system, a storage tank was also installed 60 л Raymer IMP60, circulation pump KOER.
It is important to note, that as per the recommendation of the engineer, an alcohol solution was poured into the system from the street side (35-40% no more).
Object: Manor in. Bila Tserkva in Kyiv region
After analyzing the existing heating system it was decided to establish inverter heat pump Raymer RAY-15DS1 EVI, which, thanks to its technology and high efficiency ratio, is able to provide significant savings on heating.
To increase the reliability and safety of the system, it was also decided to install an expansion tank and a pump group.
Completed scope of works
- Analysis of the existing heating system
- Choosing a place to install the heat pump
- Assembly Raymer RAY-15DS1 EVI inverter heat pump
- Installation of additional components
- Setting up and testing the system…
Object: Private house in. Dubno, Rivne region
The main purpose was to install a heating system, which would work regardless of external temperature conditions and ensure maximum efficiency.
To achieve this, it was decided to establish soil (geothermal) heat pump Raymer RAY-17WW, which compared to traditional gas or electric boilers has significantly higher efficiency (efficiency) and saves energy on the level 60-70%.
The project envisaged deep well drilling 28 m and immersion of the heat exchanger to the recommended depth 8 m, which ensures optimal pump efficiency…
Object: Private house in the village of Khotyanivka, Kyiv region.
Tasks and solutions:
House area 160 square meters already had a heating system installed with a warm floor, however, the client wanted to find a more efficient and economical way of heating.
The client decided to install inverter heat pump Raymer RAY-13DS1-EVI on 13 kW.
Process installation of heat pump Raymer RAY-13DS1-EVI in a private house in the village of Khotyanivka, consisted of several stages, each of which was elaborately thought out and carefully executed…
Object: Manor in the village of Magala, Chernivtsi region.
Customer, the owner of a two-story private house had already installed a heating system, but wanted significantly reduce heating costs and improve system efficiency.
Was selected heat pump Raymer RAY-18DS1-EVI due to its high efficiency and economy.
It was also decided to install additional components to fully integrate the pump into the existing heating system, such as Raymer three-way valve 325 TW, Elex Hybrid U 9-1/40 V2.0 voltage stabilizer, storage tank Raymer IMP 100 l and indirect heating tank Raymer DHWP 200L for hot water supply…
Object: Manor in the village. Cherries.
Tasks and solutions:
The main goal was to reduce heating costs by implementing modern and economic solutions. The customer decided to install heat pump Raymer RAY-07MN, which is known for its efficiency and economy.
There was a heat pump connected through an inverter with protection against voltage drops.
Why do you need voltage stabilizers in the heating system…
Object: Private house in. Kyiv.
The already existing heating system needed to be modernized to achieve greater economy and energy efficiency.
The main tasks of the project:
- Ensuring efficient and economical heating of the entire house.
- Connection additional pump for hot water supply (HVP) for uniform and fast heating of water.
- Installation protection relay and stabilizer to ensure reliable system operation.
- Enabling remote control of the system via Wi-Fi for ease of maintenance…
Object: Estate in the city of Lviv.
Tasks and solutions:
The client faced high costs for heating his private house. The main goal was to minimize these expenses for providing efficient heating, hot water supply and air conditioning of the house. It was also important to integrate the new system with the existing heating elements, to strengthen their work and increase the overall efficiency of the system.
Based on the needs of the client and the characteristics of the house, the choice fell on heat pump Raymer RAY-15DS1 EVI, which is ideal for medium-sized houses and can provide heating, hot water supply, as well as air conditioning.
Additional integrated Drazice OKC indirect heating tank 300 NTR/HP and storage tank Raymer IMP on 60 liters into the system, to ensure continuous hot water supply.
Object: Manor in the village of Zastugna, Kyiv region.
Completed works:
After a thorough analysis of the current heating system and the level of thermal insulation of the house, it was decided to install a heat pump Raymer RAY-24DS1-EVI power 24 kW.
- Heat pump installation Raymer RAY-24DS1-EVI power 24 kW
- To increase the efficiency of the system was established indirect heating tank Raymer DHWP 250L and storage tank Raymer IMP 100 liters.
- Setting up the Wi-Fi control system.
Object: Manor house in the center of the city of Kyiv, Sadova street.
Tasks and solutions:
The client had problems with the use of a solid fuel heat pump, which were related to his discomfort, weight and dirt.
Therefore, he decided to replace it with a more modern and convenient device, namely the monoblock heat pump. This monobloc, in this case, is a heat pump Raymer RAY-19MN.
This Raymer RAY-19MN heat pump system with additional components and features provides reliable and efficient heating and cooling for the customer, while minimizing inconvenience, associated with solid fuels.
Object: Kyiv Svyatoshynsky district, bank of the Dnieper
Completed works:
- Heat pump installation Raymer RAY-18DS1-EVI 220V 18 kW split system instead of a geothermal pump, as well as installation of boiler equipment.
- Laying of freon pipeline 5-6 meters.
- Connection to the warm floor around the entire perimeter of the house.
- Wi-Fi control settings
Object: "Korona-Hall" car wash area 1000 sq.m..
The task of the project was provision of a reliable and cost-effective heating system for commercial premises with an area of 1000 square meters, consisting of five floors.
The client highlighted two main requirements: a significant reduction in heating costs and the possibility of using solar panels in the future. The decision was a choice of the air-water heat pump Raymer RAY-32DS1-EVI on 32 kW, installed on a specially made pedestal on the roof of the building. This choice ensured reliable and efficient operation of the heating and hot water system with minimal operating costs. The backup source of heating remained the gas boiler 78 kW, and was also established drive Drazice on 250 liters. The developed system also foresees the possibility of adding solar panels in the future, which will allow the client to further reduce heating costs and make his business more ecologically oriented.
Object: House area 220 sq. m in the Zaporizhzhia region
A client from the Zaporizhzhia region requested the installation of a heat pump to save on heating his home, area 220 square meters. The main goal was to provide efficient heating at minimal costs. Was selected monoblock heat pump Raymer FA-05 with voltage 380V. Additionally, the buyer plans to use the pump for hot water and air conditioning in the future. The installation was carried out taking into account the integration into the existing heating system, and also with installation on the sunny side for maximum heating efficiency.
Object: A large two-story house 340 sq.m. in Chernivtsi region.
We have analyzed the client's needs, the size of his house and the desired level of energy efficiency. After that, they decided to use an air-water heat pump Raymer RAY-15DS1 EVI 220 AT 15 kW, which perfectly suited the customer's requirements and ensured high efficiency in work.
To increase the efficiency of the system and reduce heating costs, it was decided to install buffer tank on 120 liters, which made it possible to reduce the load on the heat pump and ensure a stable heat supply in the house.
Object: Two-storey house 270 sq.m. in the city of Rivne
When updating the heating and hot water system in a private house with an area of 270 sq.m. our client was faced with the need to choose a reliable and economical solution. He sought not only provide comfortable heating and hot water supply, and reduce energy costs. To solve these problems, we have proposed install an air-water heat pump split system Raymer RAY-18DS1 EVI 380 AT 18 kW, which has high efficiency and reliability.
in addition, installation of additional components, such as buffer tanks and a three-way valve, supplemented the functionality of the system, making it more flexible and efficient to use. These additional elements ensure even distribution of heat, stable pressure and optimal hot water temperature, which improves the operation of the entire system and increases its service life
Object: House area 170 sq.m. m. Chornomorsk
The client turned to us with a request install a reliable and economical system of heating and hot water supply.
To solve the tasks, we have proposed installation of a split system of the Raymer RAY-18DS1 EVI air-water heat pump on 18 kW. In addition, it was decided to install Raymer equipment, including Raymer DHWP indirect heating tank on 200 liters, storage tank Raymer IMP on 100 liters and Raymer three-way valve 325 TW.
These components complement the main heat pump and allow you to create a complete system of heating and hot water supply, providing the client with maximum comfort and ease of use.
Object: House area 220 sq.m.. Cotton grass, of Kyiv region
The client requested reduce heating costs in your private home, area 220 square meters. Having different sources of heat, such as a solid fuel boiler, electric boiler, convectors and radiators, the client wanted to find a solution, which would be more economical and efficient.
The main goal was to ensure constant and comfortable heating of the house, reduce energy costs and increase overall efficiency
heating systems.
Air-to-water heat pump Raymer FA-04 is a reliable and effective solution for heating and cooling residential and commercial premises, providing a high level of comfort with minimal energy costs.
Object: A two-story house with an area of 156 sq.m.. Odravo, Odesa region.
Completed scope of works:
-
Preparatory works: First, a detailed assessment of the client's needs and analysis of the existing heating system was carried out. An installation plan was then developed, which took into account the integration of the pump into the existing system.
-
Installation of the pump: Our team of professionals installed the heat pump Raymer RAY-18DS1 EVI according to the developed plan. This included connecting to the existing heating system, connecting to the power supply and setting up the pump.
-
Check and adjust: Once the installation was complete, our team tested the system and configured it to ensure optimal performance and efficiency.
Object: m. Kharkiv, private house to 200 sq.m.
The main task of the project was to provide efficient and economical heating to improve the comfort of living in a private house. The client wanted to find a solution, which would allow him to significantly reduce heating costs.
Selection of a heat pump
After careful analysis of needs and operating conditions, it was chosen heat pump Raymer RAY-15DS1 EVI, which has the necessary power and technology for efficient heating. Its ability to work in tandem with the existing heating system, including an electric boiler and underfloor heating, made him the perfect choice for this project.
Object: House area 68 sq.m near the village of Khromogorb, Stryisky District, Lviv region.
Tasks and solutions
The client expressed a desire to save on heating, without sacrificing the comfort of living in the cold season. After analyzing the needs of the client and the features of the house, it was decided to install heat pump Raymer RAY-07MN power 7 kW monoblock type. This choice was made due to the high energy efficiency of the device and its ability to work in a wide temperature range.
Advantages:
-
Comfort: Thanks to the silent operation of the pump and the possibility of remote access via Wi-Fi, the client received comfortable and convenient management of the heating system. Now he can control the operation of the pump and monitor its operation from any point, where there is internet access.
-
Efficiency: Heat pump Raymer RAY-07MN provides effective room heating even at low ambient temperatures. High temperature at the exit to 60 ° C guarantees comfortable warmth in the house at any time of the year…
Object: House area 240 sq. m. in the Osokorka district of Kyiv
To our client, to the owner of a private house in the city of Kyiv, had to find an effective solution for reducing heating costs while providing a comfortable temperature in a large house 240 square meters.
After a thorough study of the client's needs and the features of his home, we suggested installation heat pump RAY-19MN monoblock. This choice was justified by its high efficiency, reliability, the possibility of working as heating, as well as cooling and the ability to provide comfortable heating even at very low temperatures.
Object: Private house 300 sq.m.. Nails
Tasks and solutions
The owners of a three-story house with an area of 300 м², located in the Vasylkiv district, encountered high costs for heating and domestic hot water due to the use of a Tenko electric boiler. The heating system included underfloor heating on the first floor and radiator heating on the second and third floors, which consumed a significant amount of electricity, especially in the colder months.
The solution was the installation of a Raymer FA air-to-water heat pump-08 на 27 kW. To optimize costs and increase the efficiency of the heating system. This heat pump is able to provide the necessary amount of heat for a house with such an area, while significantly reducing electricity costs.
Object: Commercial space area 170 m2, m. Kyiv
The project was supposed to solve the problem of high electricity costs, characteristic of traditional heating systems, to guarantee an even distribution of heat over the entire area of the room.
The choice settled on the Raymer FA monobloc air-water heat pump-05 на 19 kW (380V), which is known for its high efficiency and reliability
Convenience for the client
- Energy saving
- Uniform heating
- Convenience of service
- Remote control and configuration
Object: Private house, new building, area 230 м²
Completed scope of works:
- Installation of a heat pump RAY-18DS1-EVI, as well as installation in the underfloor heating system and extended radiators.
- Setting up the heating system to achieve the most economically beneficial mode of operation.
- Proper drainage of water channels was ensured.
- Setting up the Wi-Fi control system
Customer benefit:
-
Savings in the off-season: In periods, when active heating is not required, the heat pump goes into standby mode, which contributes to additional energy savings.
-
Payback for everything 3 years!
Object: Private house, area 190 м²
The task was set to create a system of heating and hot water supply, which would ensure minimum electricity costs, while guaranteeing reliability and comfort for residents.
Completed scope of works
-
Careful study of the layout of the house, insulation level, and the existing heating system made it possible to determine the optimal places for placement as external and indoor units, as well as an indirect heating boiler 750 l
-
Heat pump RAY-18DS1-EVI, boiler of indirect heating on 750 liters was installed in compliance with all technical requirements and safety standards.
-
After the successful testing of the system, specialists adjusted it taking into account the individual needs of the residents and taught them the basics of controlling the heat pump and monitoring its operation via an intelligent controller and Wi-Fi.
Object: Private house, area 230 м²
Installation of a heat pump – one of the most promising solutions, which makes it possible to significantly reduce heating and hot water costs, while minimizing environmental impact.
The choice of equipment was based on a comprehensive analysis of several factors:
- Warming the house: It guaranteed a reduction in heat loss and an increase in the efficiency of the heating system.
- Medium-temperature heat transmitter: The use of warm floors and extended radiators made it possible to ensure an even distribution of heat throughout the premises.
- Correct dilution of water channels: It ensured optimal circulation of the coolant and the efficiency of the heating system.
Based on these factors, the Raymer RAY-18DS1-EVI power heat pump was selected 18 kW (380V), which met all the power and efficiency requirements for this house.
Main task, that stood in front of a car wash in Kyiv, was the need to reduce electricity costs, used for space heating and water heating, while maintaining a high level of service quality.
To achieve this goal, it was decided to install two Raymer FA heat pump monoblocks-08 на 27 kW each. The choice depends on several factors:
- High energy efficiency of Raymer FA heat pumps makes it possible to significantly reduce electricity consumption compared to traditional heating systems.
- Ease of maintenance of monoblocks Raymer FA-08 reduces time and costs for system maintenance.
- Possibility of remote control and configuration heating system via Wi-Fi provides additional convenience for car wash owners.
Object: Private house, area 140 м²
Under construction, the task was to create an efficient system of heating and hot water supply, which would make it possible to minimize electricity costs.
Benefit for the client
- Energy saving: Due to the high efficiency of the heat pump.
Comfortable living conditions: Heating and hot water system, equipped with a Raymer RAY-15MN heat pump, ensures stable maintenance of a comfortable temperature in the house. - Reliability and durability of the system: The use of an intermediate heat exchanger and storage tank increases the reliability of the system, and integration with an electric boiler as a backup source of heating guarantees its uninterrupted operation even in extreme weather conditions.
- Savings in the off-season: the heat pump goes into standby mode, which additionally reduces energy consumption and enables the client to save money on heating
Object: Private house, area 100 m² in s. Annual, Volyn region.
Benefit for the client
- Saving. The RAY-10DS1-EVI heat pump, thanks to EVI technology and a double rotary compressor with inverter control, significantly reduced heating costs already in the first month of operation.
- Comfort and convenience. Smart Wi-Fi control allows the customer to easily control the heating system remotely. Thanks to which, it is much more comfortable to take care of the temperature in the house.
- Environmental friendliness. Using a heat pump helps reduce the carbon footprint, since the system uses renewable energy sources for heating and domestic hot water, which makes it an environmentally friendly solution.
The main task of the project is to provide efficient and economical heating of a large greenhouse with minimal electricity costs. To achieve this goal, it was decided to use two Raymer FA monoblocks-08 на 27 kW.
The choice fell on Raymer FA monoblocks-08 for several reasons:
- High energy efficiency: Thanks to heat pump technology, significant savings in electricity are ensured. The energy consumption of the system is all 5.9 kW, which is much lower, than traditional heating systems.
- Uniform heating: Heat pumps ensure uniform distribution of heat over the entire area of the greenhouse, which is very important for healthy plant growth and development.
- Convenience of service: Raymer FA monoblocks-08 easier to maintain compared to traditional solid fuel boilers, which reduces maintenance costs.
- Remote control and configuration: The ability to control the heating system remotely via Wi-Fi allows you to quickly respond to changes in weather conditions and the needs of plants in the greenhouse.
Object: Farmstead, area 230 m2
The choice of equipment was based on a comprehensive analysis of several factors:
Warming the house: It guaranteed a reduction in heat loss and an increase in the efficiency of the heating system.
Medium-temperature heat transmitter: The use of underfloor heating and extended radiators made it possible to ensure an even distribution of heat throughout the premises.
Correct dilution of water channels: It ensured optimal circulation of the coolant and the efficiency of the heating system.
Based on these factors, the Raymer RAY-18DS1-EVI power heat pump was selected 18 kW (380V), which met all the power and efficiency requirements for this home…
Object: Private house of 190m²
Completed scope of works:
- Preparation of the installation site
- Installation and fixing of external and internal blocks of the Raymer RAY-18DS1-EVI air-water heat pump on 18 kW.
- Electrical work and settings of the control and monitoring system.
- Connection of the heat pump with the tank and boiler, that accumulates, as well as integration with the underfloor heating system and radiators
- Setting up the Wi-Fi control system
Customer benefit:
-
Reduction of heating costs: After installing the heat pump, a significant reduction in electricity consumption for heating was observed. The system consumes from 2 to 4,4 kW of electricity, which is much lower than traditional heating systems.
-
Efficiency in different conditions: The heat pump works efficiently even at low ambient air temperatures, providing comfortable warmth in the colder months…
Object: Production of electrical equipment in. Kyiv 700 m. sq.
Completed scope of works:
- Parallel installation of Raymer FA air-to-water heat pumps-08
- Connection of heat exchangers and necessary accessories
- Alcohol was added to the system
Customer benefit:
- Effective heating of a large area: Due to high power and efficiency, uniform distribution of heat throughout the building is achieved, which is especially important for creating comfortable conditions, as in workers, as well as in administrative zones.
- Reliability: High-quality equipment and a reliable compressor ensure uninterrupted operation of the heating system, which is critical for industrial and office premises.
Object: Private house 200m², town. Skhidnitsa
Completed scope of works:
- Installation of the Raymer RAY-18DS1-EVI air-to-water heat pump 18 kW.
- Integration with the existing system.
- Connection to the freon line – 15 meters.
- Setting up the Wi-Fi control system
Customer benefit:
-
Savings on heating: thanks to EVI and inverter motor technologies, the pump provides high energy efficiency, which enabled the client to significantly reduce heating costs in the first month of use.
-
Reliability and efficiency. A certified PANASONIC compressor guarantees a long service life. The inverter motor optimizes energy consumption…
Object: Manor house in Chernivtsi, Magala village
Completed scope of works:
- Installation heat pump Raymer RAY 13DS1 EVI
- Connection to the freon line 5 m
- Voltage stabilization.
- A buffer capacity is connected to 500 liters
Customer benefit:
- Savings in heating costs: Thanks to high efficiency and optimization of energy consumption, the client can significantly reduce heating costs.
- Versatility of use: The pump is suitable for underfloor heating on the first floor, as well as for heating the radiator on the second floor, ensuring even distribution of heat throughout the house.
- Reliability: High-quality equipment and a reliable compressor ensure the durability and stability of the system.
Object: Private house, m. Dnipro
Completed scope of works:
- Installation of the Raymer RAY-10DS1-EVI air-water heat pump on 10 kW
- Integration with the existing system.
- Installation of the storage tank Raymer IMP 60 and circulation pump
- Setting up the Wi-Fi control system
Customer benefit:
- Efficiency and energy saving. Thanks to high efficiency and the use of advanced technologies, such as EVI and DC inverter, the client was able to reduce heating costs, while maintaining comfortable conditions in the house.
- Reliability and ease of use. The certified PANASONIC compressor guarantees a long service life and a minimum need for maintenance…
Object: with. Dudarkov, Kyiv region.
Completed scope of works:
- Installation heat pump Raymer RAY-07MN
- Pouring ethyl alcohol into the system
- Installation of a storage tank Raymer IMP 60 and electrothene.
- Connecting the circulation pump.
Customer benefit:
- Facilitating control of the heating system
- Reliability and efficiency. The system now provides more stable and reliable heating
-
Increased convenience. Raymer RS25/1 circulation pump improved heat distribution throughout the home, guaranteeing uniform heating of all rooms
Object: Private house, Kolonshchina village, Buchansky District, Kyiv region.
Completed scope of works:
- Preparation for installation and analysis of the original problem
- Installation of the Raymer FA heat pump-03 in several stages.
- Integration with the existing system, adjustment of the control system and optimization of liquid flows.
- Setting up the Wi-Fi control system
Customer benefit:
- Simplification of service.
- Continuous operation and reliability.
- Payback for everything 3 years.
- Savings in the off-season: In periods, when active heating is not required, the heat pump goes into standby mode, which contributes to additional energy savings.
Object: Production premises (mill), in the city of Zaporizhia
Completed scope of works:
- Heat pump installation Raymer FA-08 power 27 kW:
- Connecting the volume expansion tank 1000 liters
Customer benefit:
- High productivity: Thanks to the power of 27 kW, the pump is able to provide the required amount of hot water, which guarantees the continuity of the production process
- Constant temperature: The pump ensures stable maintenance of the required temperature in the storage tank. (55°C), which is critical for compliance with technological processes in the mill.
-
Raymer FA-08 has high energy efficiency, which reduces electricity costs.
Object: Manor of 150 sq. m. m in Kyiv
Tasks and solutions
The main task was to provide efficient and economical heating of the house by area 150 sq.m. and water heating. The owners were looking for a solution, which would allow to reduce electricity costs and at the same time provide comfortable living conditions in the winter period.
The choice fell on the Raymer RAY-13DS1 heat pump on 13 kW due to its high energy efficiency and ability to provide both home heating, and water heating. To optimize the operation of the system and increase its efficiency, a buffer tank with a volume was installed 60 liters and an indirect heating tank (boiler) на 250 liters.
This made it possible to create a system, able to adapt to different heat needs, minimize pump on/off cycles, which positively affects its service life.
Object: Private house in. Lutsk 200 м²
Completed scope of works:
- Installation of heat pump Raymer RAY-18DS1-EVI 380V 18 kW split system, as well as installation of boiler equipment.
- Installation of a 100-liter expansion tank and a 250-liter indirect heating boiler.
- Connection to a warm floor.
- Wi-Fi control settings
Customer benefit:
- One heat pump Raymer RAY-18DS1-EVI heats the floor of the first floor and radiators on the second floor + HVP
- Convenient control via Wi-Fi and an intuitive application
- Providing a supply of hot water for 250 l
Object: Private house in. Devils, St. Sulfur
Completed scope of works:
- Installation heat pump Raymer RAY-19MN (380V) 19 kW monoblock as well as installation of boiler equipment.
- Connection heat exchanger Raymer B3-050-66 to the monobloc.
Combining the monoblock and the heat exchanger using an alcohol circuit. - Three Elex Hybrid voltage stabilizers, connected to the Raymer RAY monobloc system.
- Setting up the heating system to achieve minimum energy costs.
Customer benefit:
- One heat pump Raymer RAY-19MN (380V) 19 kW heats all radiators evenly in each room!
- Convenient control via Wi-Fi and LED display.
- Quiet operation of the heating system…
Object: Private house to 100 sq. m., mind. School, Cherkasy region.
Problems and solutions:
-
Installation heat pump Raymer RAY-10MN as well as Wi-Fi control settings.
-
Connection to the heating system of warm fields and DHW.
Customer benefit:
The client decided to install a Raymer RAY-10MN heat pump, air-water monoblock on 10 kW. The main advantage of this pump is its ease of installation and maintenance, making it an attractive choice for private homeowners.
Let's note, what the installation of the monoblock was carried out without creating a boiler room and a boiler room, which is another plus in favor of ease of use.
Object: Private house in Kyiv region., with. Roslavychi
Completed scope of works:
1. Installation heat pump Raymer RAY-13DS1-EVI (220V) 13 kW as well as installation of boiler equipment.
2. Setting up the heating system to achieve minimum energy costs
3. Connection to the main line of the total length 5 meters
4. Setting the voltage stabilizer Ampere 9-1/25
Customer benefit:
– One heat pump Raymer RAY-13DS1-EVI (220V) 13 kW heats all radiators evenly in each room!
– Convenient control through an intelligent controller and LED display, and also via Wi-Fi
– Low noise level…
Object: Private house on 120 sq. m., in the Kyiv region., Zolochiv Village Council, KM Sky Park
Problems and solutions:
-
Installation heat pump Raymer RAY-10MN as well as Wi-Fi control settings.
-
Connection to the Raymer DHWP 200L indirect heating tank.
-
Connection to heating of warm fields and domestic hot water.
Customer benefit:
- Electricity consumption decreased in 2 times!
- One heat pump Raymer RAY-10MN на 10 kW split heats all radiators in each room!
- A supply of hot water is always available thanks to the indirect heating tank Raymer DHWP 200L.
- Very fast heating of water in the system, and as a result – fast heating around the entire perimeter…
Object: m. Kyiv, a private house with an installed heating system and alcohol circuit.
Problems and solutions:
- Installation of the Raymer RAY-19MN heat pump (380V) 19 kW kW monobloc, as well as installation of boiler equipment.
- Setting up the heating system to achieve minimum energy costs
- Connection to the alcohol circuit, to prevent freezing, as well as two heat exchangers 20 kW connected in parallel.
- Setting of two pumping pumps and control via a contactor.
Customer benefit:
-
- The client had problems using a solid fuel heat pump, which were related to his discomfort, weight and dirt.
- It was decided to replace the solid fuel boiler with a more modern and convenient device, namely the monoblock heat pump. This heat pump is a Raymer RAY-19MN.
- The pump is connected to a working heating system and convenient control is configured.
Object: Hotel in the center of the city of Yaremche, area 500 sq.m., 4 floors. Each room has heating and hot water.
Problems and solutions:
-
Installation of heat pump Raymer RAY-32DS1-EVI 380V 32 kW split, as well as installation of boiler equipment.
-
Connection to heating and hot water for every room in the hotel…
Customer benefit:
- Electricity consumption decreased in 4 times!
- One Raymer RAY-32DS1-EVI 380V heat pump 32 kW split heats all radiators in each room!
- Payback for everything 3 years! (based on current electricity prices for legal entities)…
Object: Tire fitting (tire restoration) area 250 m2. Uninsulated building, large heat losses in. Dnipro
Problems and solutions:
- Installation air-to-water heat pump Raymer FA-05 на 19 kW (monoblock) 380 V instead of a gas boiler.
- Connection as the main source of heating/cooling for a large area.
Customer benefit:
-
- Monoblock Raymer FA-05 more efficient than a gas boiler and requires significantly less time for start-up and maintenance .
- Also Monoblock Raymer FA-05 does not require additional space for placement in the room.
- Electricity consumption costs are lower compared to gas boilers 3-4 times. The gas tariff for legal entities is much higher than for electricity…
Object: Private house area 400 sq.m. Already well insulated and with a working heating system (warm floor + radiators in the bedroom)
Problems and solutions:
-
Installation of a heat pump Raymer RAY-32DS1-EVI 380V 32 kW split, as well as installation of boiler equipment.
-
Setting up the heating system + HVP to achieve minimum electricity costs!
Customer benefit:
Electricity consumption decreased in 2-3 times. On average, electricity consumption from 16-24 kW decreased to 3-7,7 kW per hour…
Object:
It is an exquisite production space with a total area of 200 sq.m. in the city of Zaporizhia, including a designated locker room area 40 sq.m. and workshop area 160 sq.m.
Tasks:
Priority task – ensuring efficient heating by installing a heat pump, aimed at maintaining a comfortable temperature of at least +21°C.
Decision:
Raymer FA monobloc heat pump was selected as an innovative solution-04, which functions under voltage 220 AT. Located on the second floor of the production premises, monoblock Raymer capacity 15 kW is the ideal choice to provide the required level of heat.
Object: m. Kyiv, Vyshhorod, private house on 110 sq.m.
Problems and solutions:
-
Installation of Raymer FA air-to-water heat pump-03 на 11 kW (monobloc type), as well as connecting to the system.
-
Connection to already installed warm floors.
Monoblock Raymer FA-03 does not require additional space for placement in the room, installed outside on a metal structure.
The buyer already had a 9 kW electric boiler as an alternative source of heating. Therefore, a heat pump was soldered into the existing heating system for increased electricity savings.
Electricity consumption costs compared to an electric boiler have decreased in 3-4 times and constitute an average of everything 2,3 kW/year…
Object: town. Mykhailivka, Zaporizhzhia region, house on 150 sq.m
Problems and solutions:
Installation of a heat pump Raymer RAY-15DS1-EVI and circulation pump to the heating system, which is already in effect. Connection to a heating system based on underfloor heating. Startup and commissioning of the system was tested by professional installers and engineers.
An inverter heat pump is installed Raymer RAY-15DS1-EVI to provide heating and hot water on the square 150 sq.m. Used in the system 5 meters of freon pipeline for connection to the existing heating system, which is based on a warm field.
Object: Sviatoshynskyi district, Kyiv, bank of the Dnieper
Problems and solutions:
- Installation of heat pump Raymer RAY-18DS1-EVI 220V 18 kW split system instead of a geothermal pump.
- Installation of boiler equipment.
- Laying of the freon line 5-6 meters.
- Connection to the warm floor around the entire perimeter of the house.
- Control settings via Wi-Fi
The main differences between air-to-water and ground source heat pumps are related to the heat source., efficiency and cost of installation. Air-to-water heat pumps, usually, cheaper in terms of installation and maintenance costs…
Object: Volyn region. with. Garage
Problems and solutions:
Installation of a heat pump Raymer DC inverter splitheat pump RAY-15DS1-EVI (380V) and electric heating with a capacity of 1000 l. The area of the house is 120m3. Heat pump installation, installation of boiler equipment, start-up and commissioning of the system was carried out with copper pipe binding by qualified engineers.
The RAY-15DS1-EVI pump is equipped with a highly efficient heat exchanger, which ensures fast and uniform distribution of heat throughout the room. in addition, the pump has a function of automatic protection against overheating, which makes it safer to use.
Compared to other pump models, RAY-15DS1-EVI has higher power, which allows it to be used for heating and cooling larger rooms. It also has the function of automatic power adjustment, which saves energy and reduces heating and cooling costs.
Object: Lviv region., with. Falconers, private estate
Problems and solutions:
Heat pump installation Raymer RAY-18DS1-EVI 380V 18 kW split system as well as electric heating with a capacity of 60 liters + Boiler indirect Drazice OKC 250 NTR/HP. Installation of a heat pump instead of a solid fuel boiler, as well as installation of boiler equipment, start-up and commissioning of the system was carried out by qualified engineers.
Object: private new house, duplex, area 600 m2, u s. Lebedivka, Kyiv region.
Problems and solutions:
Installation of Raymer FA air-to-water heat pumps-08 на 27 kW (monobloc type), as well as parallel connection to the system.
Connection as the main source of heating/cooling for a large area.
Wi-Fi control settings.
Raymer FA monoblocks-08 do not require additional space for placement in the room, installed on the street, on a metal structure.
Electricity consumption costs are lower compared to electric boilers 3-4 times.
Reliability in use: always comfortable, warm in winter and always cool in summer…