
Raymer RS-25/10-180 powerful circulation pumps, suitable for heat pumps, as well as solid fuel boiler systems, heating systems. Quiet engine operation. Does not lose performance when working with plate heat exchangers.
|
Circulation pump RS-25/10-180
|
Circulation pump Raymer RS-10 – circulation pump with wet rotor and threaded connection. Used in water heating systems, industrial circulation plants, hot water and air conditioning systems.
Ideal for air-to-water heat pump heating systems. Suitable for split systems, and for monoblock systems.
Work on coolant systems water, alcohol, glycol.
Pumps Raymer-RS equipped with three-stage speed control. Thanks to the wet rotor, the engine is protected from overheating. The perforated shaft and the filter device in front of the cartridge ensure reliable operation.
Benefits of Raymer RS:
- Possibility of installation in horizontal position
- Three selectable speed levels
- Electric motor, blocking current resistant
CHARACTERISTICS:
- Permissible temperature range: from -10°C to +110°C
- Network connection: 1~230 V, 50 Hz
- Protection class: IP44
- Insulation class: F
- Rotation frequency: 2800 / 2320 / 1780 rpm
- Threaded pipe connection: 1 1/2
- Mounting length: 180 mm
- Max working pressure: 10 there is
- Maximum head: 10 m
PECULIARITIES:
- Pump housing: cast iron
- Working wheel: plastic (polypropylene — 40% GF)
- Val: stainless steel (X40Cr13)
- Bearings: metalgraphite
- Weight – 6 kg.
- Cable with plug 1 m.s..
- Warranty period for pumps/equipment, control devices and automation systems as part of complete installations – amounts to 24 months. On accessories, control devices and automation systems, not forming a single complete installation with the equipment, – 12 months.
-
Peculiarities:
Asynchronous, working for 3 engine speeds
Single-phase glandless motor with stainless steel internal spacer
Built-in capacitor
Limits:
Pumped liquids: clean, non-aggressive, free of solid and fibrous particles.







