Blog

Ultra-quiet thin floor-mounted fan coil with Wi-Fi.

Opportunities: heating, cooling.

Housing material: Quality plastic. Decor.

Certification: CE, EMC, Emf, LFGB, UR, CE, EN14511 / 4, ENISO4871, CCC

Ultra-thin fan coil unit for rooms up to 45 sq.m. COOLING CAPACITY 2400 Tue. HEAT CAPACITY3850 Tue. Noisiness (i. speed) 22 Db Noisiness (max. speed) 39 Db Working temperature range 0℃ / +45℃ Hydrophilic aluminum radiator coating Source of power 220 AT, 50 Hz, 1 phase

Main functions and features of wall-floor fan coil units Raymer

1. Ultra-thin design, body width total 130 mm.
2. Modern design, hi-Tech production technology and elegant appearance of the case. It matches the modern interior design style.
3. Using a cross flow fan, pipeline design optimization. Strong air flow at maximum operation and at the same time low noise level.
4. Air guide installed with damping. Can manually adjust the flow angle.
5. Hidden Intelligent LED Temperature Controller (Remote Control) with elegant appearance and easy to use.
6. Cold air protection system. There is an air stop function, when the water temperature in the system is too low.
7. Left-right water pipe and electric control box can be replaced on both sides. Ease of installation and reduced dependency on furniture placement.
8. Side metal plate can be removed before installation, which facilitates the connection of pipes.
9. Fan coil filter easily replaceable.
10. 2-way and 3 way valve are optional, which can reduce installation cost.
11. Can be installed on the floor, leaning on legs (included), or on a wall without legs.

Benefits of floor fan coil unit Raymer:

• The heat exchanger consists of copper pipes with aluminum fins;
• Metal case;
• Noise insulation;
• Raymer floor-mounted fan coil units are much more efficient than any type of radiator. Where you install several radiators - you can install only one fan coil unit and the effect will be much better;
• Attractive design. Decorative horizontal insert at the bottom of the fan coil unit. The raymer fancoil will also fit into a classically styled interior, and modern design;
• Modern models of motors and fans produce minimal noise during operation;
• Blinds provide volumetric distribution of air in the room. Due to the directed distribution of air flows by fan coil units, the heating of the room is more efficient, than with radiator heating.

Assembly, maintenance and management

floor mounting, little space required for installation. Fancoil maintenance does not take much time and effort, since all elements are directly accessible. During the operation of fan coil units for cooling, the resulting condensate is discharged by a special drainage pump into the sewerage system, or is displayed on the street under a slope, or drainage is removed. Also, the installation of fan coil units can be combined with radiator heating. (if it already exists).

Cost-effective and efficient use of fan coil units, when a heat pump is used as a heat source, condensation, convection, electric boilers, as this gives you the opportunity to operate the heating source in modes 30-40 degrees (floor heating operating temperature).

Raymer fan coil units quickly warm up the room due to forced air injection (fan), not natural convection.

There are cases, when you can't do without a floor fan coil (when an existing facility is effectively heated only when supplying 60-70 degrees), Do you want to install a medium temperature heat pump?, or reduce the coolant temperature, to achieve greater savings. In cold rooms, corners, there, where are the so-called "dead zones" – to help this came up with wonderful floor fan coil units.

Fancoils floor type Raymer FLP40CM - The best decision, if you want to comprehensively solve the issue of maintaining and creating a comfortable microclimate in the entire building, or in separate rooms, with minimal cost and installation time.

Technical characteristics of fan coil units
Model		FLP-20CM	FLP-30CM	FLP-40CM	FLP-50CM	FLP-60CM
Source of power		220V,50Hz,1Ph
Maximum air flow	m3 / h	200	300	400	500	600
	CFM	118	176	235	294	353
Minimum air flow	m3 / h	80	120	180	220	260
	CFM	47	71	106	129	153
Cooling capacity	Tue.	1000	1900	2800	3500	4000
	Btu/h	3400	6500	9550	12000	13700
Cooling capacity (1)	Tue.	1500	2850	4200	5250	6000
	Btu/h	5100	9700	14300	17900	20500
Heating capacity (2)	Tue.	2000	3800	5600	7000	8000
	Btu/h	6800	12950	19100	23900	27300
Noise level	dB(A)	38	39	40	41	42
Input power	Tue.	15	18	20	26	32
Water flow volume	m3 / h	0,17	0,33	0,49	0,6	0,64
pressure drop	kPa	12	14	18	20	24
Water pipe connection (entrance)		R1/2″
Water pipe connection (exit)		R1/2″
Zmeevik	Type	High efficiency copper pipe with hydrophilic aluminum coil
Max working pressure	mPa	1,6
Condensation pipe (diameter)	mm	￠21
Size without packaging (Д×Ш×В)	mm	700×130×581	900×130×581	1100×130×581	1300×130×581	1500×130×581
Packing size (Д×Ш×В)	mm	750×180×630	950×180×630	1150×180×630	1350×180×630	1550×180×630
Net weight	kg	14,7	18,5	21,6	24	28
Gross weight	kg	16,5	20,6	24	28	33,5