Installation of heating equipment Raymer, heat pump RAY-18DS1-EVI (220V) in g. Chernomorsk

An object: House area 170 sq.m in g. Chernomorsk

Tasks and solutions:

Our client, owner of a house with an area 170 square meters, contacted us with a desire install a reliable and economical heating and hot water supply system. His main request was, so that the system is efficient in operation, provided comfortable warmth and hot water, and also allowed to reduce energy costs.

To solve the problems, we proposed installation of a split system of the Raymer RAY-18DS1 EVI air-water heat pump on 18 kW. This choice is due to the high efficiency of this pump., as well as its ability to provide the necessary heat output to heat a house of the specified area.

Additionally, it was decided to install equipment from Raymer, including indirect heating tank Raymer DHWP on 200 liters, storage tank Raymer IMP on 100 liters and Raymer three way valve 325 TW. These components complement the main heat pump and allow you to create a complete heating and hot water supply system, providing the client with maximum comfort and ease of use.

Thus, The main task was to provide the client with a reliable and efficient heating and hot water supply system, and the solution was selection of quality Raymer equipment and its comprehensive installation, adapted to the specifics and requirements of a given object.

Scope of work completed:

Heat pump installation: We started work with the installation of an air-to-water heat pump split system Raymer RAY-18DS1 EVI на 18 kW. This stage included choosing the optimal location for the outdoor unit, installation of its fastening and connection to the indoor unit, located indoors.
Installation of additional equipment: To create a complete heating and hot water supply system, we also installed additional equipment. This included installation Raymer DHWP indirect heating tank on 200 liters, Raymer IMP storage tank on 100 liters and Raymer three way valve 325 TW. All of these components have been professionally installed and connected to the heat pump system.
System setup and testing: After installing all the equipment, we configured and tested the system. This included checking the functionality of each component, setting up heat pump operating parameters, as well as checking heat transfer through the heated floor and other elements of the system.
Training the client: At the end of the work, we trained the client on the operation and management of the system. We told him about all the features of the heat pump and additional equipment., and also provided instructions for operation and maintenance.
Inspection and acceptance of work: After completing all stages of installation, we carried out a final inspection and acceptance of the work. We made sure, that the system works correctly and efficiently, that all components are correctly connected and configured, and that the client is completely satisfied with the result.

Thus, The scope of work performed included not only the installation of a heat pump, but also the creation of a complete heating and hot water supply system, as well as client training and testing the functionality of the entire system.

Benefit for the client:

Saving on heating: Installation of air-to-water heat pump Raymer RAY-18DS1 EVI allowed the client to significantly save on heating costs. Thanks to the efficient operation of the pump and the use of heat from the environment, the client can significantly reduce their energy costs for heating their home.
Saving on hot water: Since the heat pump is also used to prepare hot water, the customer also benefits from savings on hot water costs. Thanks to efficient pump operation, the client can receive sufficient hot water for his domestic needs, while consuming less electricity.
Comfort and convenience: Installing a heat pump allows the client to enjoy a comfortable and cozy climate in their home all year round. Thanks to the ability to regulate the room temperature and maintain a constant heat level, the client can feel comfortable at any time of the year, regardless of weather conditions.
Environmental benefit: Using a Heat Pump, powered by renewable energy sources, helps reduce negative impacts on the environment. The client contributes to the conservation of natural resources and the reduction of greenhouse gas emissions, what is important for maintaining ecological balance.
Long-term economic benefits: Heat pump installation – it's an investment in the future. In addition to instant savings on heating and hot water costs, the client gets the opportunity to reduce energy costs for many years. Thus, the heat pump becomes a long-term and profitable solution for the client.

Main characteristics of the heat pump Raymer RAY-18DS1 EVI 220 AT 18 kW:

power usage: Varies from 1980 to 4380 Tue., allowing efficient use of energy depending on needs.
Recommended heating area: To 250 square meters, which provides sufficient coverage for medium to large homes.
Media heating temperature: Ability to maintain media temperature between 55°C and 60°C, which provides comfortable heating in the room.
Working temperature range: From -30°C to +43°C, which allows you to work effectively in different climatic conditions, including severe frosts and heat.
Compressor type: Panasonic DC EVI Inverter Compressor, ensuring stable and efficient operation throughout the entire service life.
Freon type: R410, which is an environmentally friendly and efficient choice for heat pump operation.
Manufacturer: Mitsubishi Electric Company, which guarantees high quality and reliability of the equipment.
Type of heat pump: Air-water, which ensures efficient use of heat from the air for heating and hot water preparation.
Thermal power: 18 kW, which allows you to provide enough heat to heat the house and supply hot water.
Current consumption: 6.7 A, which is an economical option in terms of power consumption.
Voltage: 220 AT, which corresponds to the standard voltage for domestic heating systems.
Noise level: 60 dB, which ensures quiet operation and maintains indoor comfort.
Payback period: 4 of the year, which makes the investment in installing this heat pump profitable and efficient in the long term.