Heat pumps RAYMER is unique, multifunctional solution for heating your home.
Let's consider the main differences in the installation of various types of heat pumps.
RAYMER will give you the opportunity to become independent from the central gas supply, solid fuel and high costs of electricity.
You don't need permissions, separate gas supply or increase in electricity capacity, all you need is to contact us for consultation and selection of heat pump capacity.
Comfortable use of the RAYMER heat pump will be ensured by the built-in WI-FI module on all models and even on fan coils. There are two main ones types RAYMER heat pumps: split system and monoblock.
MONOBLOCK
Monobloc RAYMER cheaper (due to the lack of an internal unit.
Consists of external unit (in which the heat exchanger is located) and control panel. It is easier to install (you only need to add the feed and the return), its main advantage is the saving of internal space due to the absence of an internal unit (hydraulic module). The water supply is carried out directly to the monoblock, and if the electricity is turned off for a long time in severe frosts, there is a risk of freezing of the coolant with subsequent rupture of the heat exchanger.
Therefore, we recommend several types of installation of a heat pump of the monobloc type:
- Install UPS (uninterruptible power supply). The DHW will allow water to circulate in the system when the lights are turned off, which greatly complicates the process of freezing the coolant.
- Pour into the system alcohol solution. Antifreeze will not rupture the heat exchangers when the power is turned off. In this case, an alcohol solution is better, because it has greater fluidity and is better pumped by circulation pumps, than propylene glycol. Therefore, you will not need to increase the power of circulation pumps.
- Install the intermediate heat exchanger and pour the alcohol solution into the "Heat pump" circuit- heat exchanger". This option is more profitable with large volumes of coolant in the system.
Monobloc RAYMER is a bestseller among heat pumps due to its attractive cost and optimal efficiency. Simple installation will allow you to quickly install a heat pump and not be left without heat and hot water supply for a long time.
SPLIT SYSTEM
Split system already requires qualified installation due to the presence of two blocks (external to internal), which need to be connected by a freon main.
Split system from RAYMER is the most economical heating system in terms of electricity consumption from 0.9kW/year thanks to inverter technology and a proprietary compressor from Panasonic.
RAYMER 4th generation split systems are also equipped with EVI technology (injection of hot freon into the compressor). The systems are also equipped with Wi-Fi modules.
The noise level will pleasantly surprise you. The SOR coefficient is 3.75~4.9, which is one of the best SOR indicators among "main competitors".
Assembly RAYMER split systems consists of in the connection of the external unit with the hydraulic module with a copper freon line.
Before starting the heat pump you need to vacuum the main line, so that the remains, dust and other small parts, which may be in the main line after installation did not get to the compressor.
Such "sterility" of the pipeline prevents the compressor from breaking down. Trunk, as well as the supply and return pipes in the monoblock at the time of installation is required cover with insulation of the Kflex type in order to minimize heat loss during the circulation of freon or coolant.
For the installation of the system already not needed propylene glycol or alcohol solution, because the water from the heating system is in the house and is not prone to freezing.
Already in the RAYMER split system a circulation pump and a Wi-Fi module are installed for remote control of the system, which will make it possible to heat or cool the room in advance.
The remote control app can control the heat pump modes, errors and state of the split system or monoblock and other functions. Also RAYMER heat pump controller has a memory function.
Also, heat pumps can be easily integrated into an existing system with any boilers and even with solar systems, which will allow you to save in the off-season and effectively heat the premises in severe frosts.
Split systems can work up to -30C thanks to inverter technology and EVI technology.
Heat pumps "Air-Water" RAYMER are low-temperature TNs. They heat the coolant (water in the heating system or other liquids) up to +60C, have the possibility of installing additional heating elements.
It is better to use a split system together with a branded one storage tank (buffer capacity).
RAYMER tanks universal assembly, made of stainless steel 304 (food), already built-in magnesium anode and 2 kW heating element.
FANCOIL
Fancoils RAYMER is a unique heat transmitter, which is powered by any type of heat pump and provides, as heating in winter, as well as full air cooling in the summer.
Fancoil consists of a fan, which distributes cooled or heated air around the room and the heat exchanger, which performs the functions of a heater. Selecting a fan coil is identical to selecting a heat pump or air conditioner — the power depends on the area.
New models RAYMER fan coils equipped with a Wi-Fi module and a stationary controller. The model range of RAYMER fan coils consists of floor models of various capacities.
